|
|
|
Key
Specifications/Special Features:
The
EX-9510 repeater boosts the RS-422/485 signals to extend the reach
distance up to 4000 ft (1200m) and increase the maximum number of
connected nodes up to 128.
With
a special circuitry, EX-9510 is able to automatically detect the data
flow and switch the direction of the data lines accordingly.
“Auto
baud rate detector” enables EX-9510 to automatically configure
RS-422/485 signals to any baud rate without external switch setting.
Build
in Opto-isolations on EX-9510 provides 3000VDC of isolation to protect
the host computer from ground loops and destructive voltage spikes on
the RS-422/485 data lines.
EX-9510
also offers internal surge-protection on the data lines. Internal
high-speed transient suppressors on each data line protect the module
from dangerous voltages levels or spikes.
Features
- Automatic
internal RS-422/485 bus supervision
- No
external flow control signals required for RS-485
- Minimum
3000VDC isolation protection
- Transient
suppression on RS-485 data lines
- Supported
baud rate up to 115.2Kbps
- Reach
distance up to 4000 feet (1200m)
- Reserved
space for termination resistors (R8,R9)
- Power
and data flow indicator for troubleshooting
- Power
requirement: +10V to +30VDC
- Mounts
easily on DIN-rail or panel
Specifications:
- Power
requirement: Unregulated +10 to +30VDC with protection from power
reversals
- Case:
ABS with captive mounting hardware
- Accessories
(Supplied): NYLON DIN-rail Mounting Adapter SECC Panel Mounting
Bracket
- Plug-in
screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5mm) wires
- Supported
baud rate (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K
- Isolation
voltage: 3000VDC
- RS-422/RS-485
connector: plug-in screw terminal
- Power
consumption: 0.7W
- Operating
temperature: 0~70℃
(32~158℉)
- Storage
temperature: -25~85℃
(13~185℉)
- Humidity:
5~95%, non-condensing
Main Export Markets:
|
;)
Driver
;){kind=link}